HI there, We have a suite of remote sites that we connect to hourly using loggernet to connect through IP->NL100->Freewave.Recently (about 2 months now), following a battery …
仪器使用
LoggerNet doesn’t know which tables are available in mixed-array data loggers unless the program is identified by associating it. If no tables show up in the Data Filer table …
I have a seabird probe continually output string data that I am connecting to a CR1000. When I connect it to the RS232 port with a null modem cable, I have success reading the stri …
The data cache of LoggerNet running on the same machine is available. Specify the LoggerNet server on the same machine as Localhost, rather than entering a remote IP address. …
To all,Help needed please. The following table is supposed to log the total rainfall between 7:00 the previous day to the 7:00 then next day, but it is only logging exactly half of …
There is not an easy way to calculate how much desiccant is needed in an enclosure or how quickly the desiccant will need to be replaced. The following conditions affect the replac …
Hello everyone.I have just recently started to work with RTMC and managed to get the neccesary things done in regards to monitoring our stations and sending alarms. Now I have begu …
The desiccant should be replaced when the top colored dot on the humidity indicator card (pn 28878) turns pink; the humidity indicator card is included in the enclosure supply kit …
I am looking for the CR Basic program in CR1000to connect theCC640 digital camera!.I have a DB9M-terminal to wired in RS232 conecction!. I want to connect the digital camera in thi …
The control line voltage range is 4 to 16 Vdc. A drive current of < 0.5 mA is required. …