The PWS100 measures the size and velocity of particles in the air. It can provide precipitation rate and water equivalent accumulation, but it is primarily used to report pre …
仪器使用
The potential error is roughly ±0.4% of distance for a ±25° Celsius variation away from 0° Celsius. …
I've moved the files in the c:pc208W from one XP "machine" to another, but it doesn't remember my hardware configuration.Where are the files (or registry entries?) for th …
The SR50A-L must be vented to the atmosphere to operate correctly. This is normally not a problem in alpine conditions, but in temperate, damp climates, the vent may introduce cond …
Dear Campbell Develop Engineer,We want to upgrade our system,because our datalogger has broken,we used two AM416 to read 68 vibratingwire sensors, AM416 connected to CR10x through …
The sensitivity can be adjusted slightly at the factory, but it cannot be recalibrated. Typically, the transducing diaphragm needs to be replaced periodically to maintain calibrati …
I need a command to be used with hyperterminal to get real time data from CR1000. What other configuration are needed to use huperterminal with CR1000新对话如下：Hi Hatem,Have you tried …
PleaseI could help or send the program or calculation of evapotranspiration (Eto in *. CR1) time in mm with a net radiation sensor in the CR1000 logger. (WAS = mps, Temp = C, Hr =% …
The SDM-SIO1 acts as a virtual serial terminal to a CRBasic data logger. The data logger’s serial functions can be used to control the device. …