The ClimaVUE™50 mounting type can be a meteorological stand, pole in cement, or tripod: 31.8 to 50.8 mm, 1.25 to 2.0 in. diameter. The ClimaVUE™50 is fitted with a V-bo …
仪器使用
Can somebody show me two techniques for increasing the magnitude of the mV signal coming into the datalogger when using a thermistor to measure temperature新对话如下：moon83,Increasing t …
The ClimaVUE™50 collects all the information necessary to correct for absorbed radiation using an energy balance approach. …
FYI ~ We have a new Application Note on Interfacing Serial Sensors.http:www.campbellsci.comdocumentstechnical-papersserial.pdfJanet* Last updated by: Janet on 10132009 @ 10:32 AM * …
The SDI-12 bus is capable of having at least 10 sensors connected to it, each with 200 feet of cable. With fewer sensors, longer cable lengths are possible. …
When using a Windows mobile PDA (with Mini USB connector) we are able to communicate by Bluetooth adaptor and a SC932A to a CR10X. But we wish to connect directly i.e. from mini US …
See the maintenance section of the manual for recommendations. …
HelloI've tried to communicate from my CR1000 (os v17) to a microcontroller using the CS IO port. To do so I tried to open the serial port using this command: SerialOpen (ComME,240 …
No. The SP230SSCBL is used with the SP230SS. …
We have a CR1000 logger with OS17 installed and with a CC640 camera connected.The camera currently lacks a CF card, but I tried to configure the logger's USR: drive to store a good …