Requests for cellular data service for cellular-enabled devices not purchased from Campbell Scientific must be reviewed and approved to ensure they meet the requirements for use on …
仪器使用
When using an IfTime statement does the interval start when you upload the program to the logger, the nearest hour, or something else?I currently have it running every 5 hours for …
Hi,New to the forum but have been lurking for a while.I am interested in optimizing the default html interface for my PPP configured CR1000s so that data can be viewed easily with …
We have access to over 600 cellular carriers in 185 countries. If the country where you need service is not on the Country List for Cellular Plans, contact Campbell Scientific Cust …
Campbell Scientific cellular data plans provide a private dynamic IP address. With a dynamic IP address, a data logger can connect to the Internet and push data or emails to a prog …
Hi,We make heavy use of the FFTSpa function in our CR1000 program, and are therefore highly interested in any method of speeding up that operation. We are only interested in the re …
Hydro-Link is an easy-to-use graphical user interface (GUI) for generating programs for the CR300 and CR310 dataloggers. The program is built based on the user's application and al …
We have supported the Modbus protocol for quite a few years, and the use of this protocol in our dataloggers seems to be increasing.Therefore, as many of you who use the Modbus pro …
Short Cut has been in use for several years and has been a helpful tool for program generation. As such, it has been updated over the years to provide functionality that is not yet …
Hi,So i need a current shunt CURS100 for the analog 4-20mA sensors.So i need 5 current shunts:windspeedwinddirectiontemphumradiationThe sensors need a 24vdc powersupply, but my cr1 …