Hi, I want to do the same like http:www.campbellsci.comforummessages.cfm?threadid=5CDA2CC2-FC6F-52D0-CEB824474A064916but using a CR10x datalogger.The program on use for routine mea …
仪器使用
No. The CS301CBL is used with the CS301. …
No. It’s not the range that makes a sensor a quantum sensor. It is the type of light filter used with the photocell that only allows specific wavelengths of light in the PAR …
We are using RTMC Pro on a machine that has a Microsoft Exchange server for it's e-mail capabilities. For some reason RTMC Pro will not generate an e-mail alarm that we have setup. …
Is there any difference between CF memory cards? I have the CR1000 with CFM100 card reader and a 256CF card purchased from Campbell. This card works, the reader and the program rec …
Compare the sensor against a recently calibrated CS301 on a clear, sunny day with the sun overhead. Ensure that the sensor being used as a reference is also level. …
I have a program developed for the CR10 logger. What is the best way to convert it for use with the 21X logger?新对话如下：Open the CR10 program in Edlog. At the top of the program you'l …
The leveling base provides physical stability and helps ensure the sensor is leveled correctly. It is not recommended to use the sensor without the base. The sensor mounts to the b …
Hello,I've been using the example from the RavenXTV manual for sending text messages from my remote sites. Verizon is my cellular provider. It turns out Verizon discontinued their …