Yes, this interface was originally developed for the water market but was not developed to only handle that market's applications. For example, customers have used it for MET appli …
仪器使用
Hello,I have a analog cup anemometer and winddirection set and temphum and a radiation meter from Mierij Meteo.This windsensors have a termination of 4-20mA @ 0..50 ms. By means of …
Yes. If the sensor is compatible with the hardware, it can be used with this interface by using one of the generic sensor input options. …
whether the datalogger can be set during his lifetime for just a few years? for example we want the datalogger can only operate for 2 years, after that we have to settingturn on ag …
Yes, but only as needed. At this point, the generic sensor options should cover all the needs, and they are very easy to use. This list was intentionally kept small to reduce compl …
Hello.I have a CR1000 data logger, the problem is that: I send the program compiled to the data logger and then I desconect the data logger to the current 12V ..... when past some …
I need to test an COM300 phone modem. The COM300 is connected to an analog phone line and a CR10 datalogger with a SC12 cable.It is grounded to the datalogger as well.When the anal …
The CR300 must have the Wi-Fi option built in. With the Hydro-Link interface already applied to the data logger, all the web pages of the interface reside on the logger. Now t …
No. The HC2A-S3 is fully compatible with the analog CRBasic instructions used for the retired HC2S3-L sensor. …
I recently purchased a 05103-66 and sutron 6661-1256 interface assembly.This is not what I thought it was but I would like to try to get this going. It is used military surplus but …