Hi,This is more of a QAQC data processing question.I assume many of you have tipping buckets deployed in the field, many remotely.We often come across these buckets clogged with de …
仪器使用
The Clear Sky Calculator (www.clearskycalculator.com) can be used to determine the need for quantum sensor recalibration. It determines PPFD incident on a horizontal surface at any …
The CR300 and CR310 dataloggers do not support TTL logic, which is what the CS526-L sensor uses. A TTL to RS-232 converter (supplied by the user) could be used, however. …
Just upgraded my computer to loggernet 4.0 from 3.4.1.When I try to connect to the logger (CR1000) via the com port as usual, I get the error "read failed".The connection …
If you purchased a Stahlin enclosure from Campbell Scientific and it has a failed gasket, we can help you. We will need you to provide an image of the failed gasket, verify the siz …
Hi,Of late I have been having issues with interfacing serial "RS232" sensors to controls ports on the loggers. Most of the issue appears to be the widespread use of the M …
hi all.i am just playing around a bit with the BMP5-Direct-SDK and a CR1000+NL115 for fun. Its really nice, how easy it is to "talk" with the logger taking this approach. …
When programmed as a “Slow Antenna” sampling at 100 Hz, the CS110 would provide polarity information but not actual current flow in the wire; therefore, Campbell Scient …
Hello ForumI need a program to CR850 to show me in the displayimmediately the information without having to use the keyboard.Thank you新对话如下：Hi Julio,You will have to program the lo …
No. A valve module is required to use the Scrub Module. Only the CPEC310 comes with a valve module. …