No. …
仪器使用
Why does the LoggerNet still send out the clock command every 20 sec even when the Pause Clock Update is checked ? Also, is it possible to set this transmission interval ? Thanks!& …
When we see the turbine installations I can't see the Generator anywhere in the picture. Where do they place the electricity generator? I know Campbell Scientific is not building w …
The following information can help determine the effective range (spatial range) of the CS110:Thousands of miles: When there are no clouds in the sky, the CS110 responds to what is …
Hello All,Is it possible to read a string sent to a CR1000 via a modem, and then parse that string to reset a variable being used in the main program?Chris新对话如下：Yes, virtually anyt …
When a battery won’t charge above approximately 10 or 8 V, it has a bad cell. The battery should be replaced.A 12 V lead-acid battery is six cells in …
It is posible?. NTP (Network Time Protocol).I need syncronize the datalogger CR1000 and PC with linux.In linux (Ubuntu) it is posible using Ntpdate, but in the datalogger CR1000?新对 …
The molecular sieve is a direct replacement for the old magnesium perchlorate bottles. The molecular sieve may be used for any Campbell Scientific analyzer that used the …
Hi,I'm trying to send data out the serial port of the datalogger whenever a new record is stored in a data table. The data table is called by means of the AcceptDataRecords instruc …
The molecular sieve has been demonstrated here by our engineering department to be effective at removing CO2 and H2O from the air sample. The change was made for two reasons:It was …