It's any way to elminate the filed RECORD in the date and time in table format:"TOA5","ESTACIÒN FOPAE","CR1000","14298","CR1000. …
仪器使用
Yes. This system also supports Modbus, which is supported by most PLCs. …
I am able to connect to my CR23X using LoggerNet with a USB to serial cable on my Windows 7 laptop, but I am having trouble with data downloads. I have a brand new USB serial cable …
The LevelVUE™B10 does not log its own data and does require a data logger. …
Hi,Is there a way in Split (or some other way) to convert the date and time in table format of the CR1000 to the date and time in array data format?Like "2008-03-10 10:00:00&q …
Yes. The orifice can be installed in the well piping. Normally the orifice line is supported by a separate stainless-steel cable to prevent the orifice line from moving up or down, …
Hi everybody!I've established both a HTTP sever and a FTP sever useing the CR1000 with the NL115 at the same time.Viewing the data in the mean of the http format is available, but …
No. A stilling well is not needed. The orifice line is normally installed inside a two-inch conduit and secured in place, so there is no movement in the orifice line. It is be …
No. The unit has temperature compensation on it, but it is the temperature of the sensors that will be very different from the water temperature. …
Hello All,I am looking to use a Sierra Wireless RavenXT modem (Verizon CDMA service) to connect to a CR1000 datalogger. That part is easy and is set up and running. I'd also like t …