The only item that requires regular maintenance is the desiccant. The interval that this needs servicing is based on the relative humidity of the site and how often the unit turns …
仪器使用
Dear All,In our current Beta version there are sometimes watchdog errors occuring. The straingh thing is, that it sometimes runs without and sometimes with watchdog errors.I am usi …
No. This is not a good data value for ambient air temperature. It is the temperature as seen by the internal pressure sensing element, and it will be affected by several other fact …
Hi,I have a project with different types of sensors from Aanderaa (deep sea sensors).All should work in the same way. Oxygen and conductivity sensors work fine, but from the temper …
Hi,I use a Aanderaa sensor in polling mode. I get correct data but only in every second scan. The NBytesReturned goes to zero every second scan and the data goes to NAN.What is the …
Currently, LNDB cannot run under Linux unless it is run under a virtual machine that emulates Windows. However, LNDB has the ability to work with three different database engines:S …
I have a data table in a CR1000 that measures a suite of parameters daily at a specific time (eg 8am) daily. I am trying to setup an RTMC page that will populate individual previou …
When the heaters are on, a flag is sent to the data logger to help the user determine if the heaters have an effect on the data. …
With Loggernet 4.0 and a CR1000 connection with NL120 is fine when on ethernet network and with wireless at that location as well. When trying to connect remotely using VPN to same …
The heaters can be controlled manually only through a programming change of the CR300 Datalogger used to control the heaters. …