Technically, because albedo is the fraction of the sun’s radiation reflected from a surface, albedo cannot be quantified at night.When calculating albedo, it is important to …
仪器使用
I am attempting to use C# to write a small application that can connect to a CR3000 datalogger. I have been able to load the dll and use some of the functions. I can use OpenIPPort …
Hello,I have a datalogger CR1000, which this one operative in way of tests before being installed definitively. When de datalogger it is installed I would like to erase the old tab …
If there is direct sun, the daily albedo graph is a U shape, because it’s a function of sun angle. If it’s a cloudy day without any direct sun, the daily albedo graph i …
Because of the loss of IR radiation, nearly all thermopile instruments typically have a negative offset. This offset is most easily visible at night-time, when a small negative val …
Hi,I would like to know the consequence of defining a wrong Pconfig value for an A100R anemometer.the A100R is a switching anemometer and not a high frequency(HF) anemometerIn the …
PolyEtherEtherKetone (PEEK) is a plastic material that has very good thermal stability and chemical resistance properties. This material was chosen for use in the manufacture of th …
I'm trying to develop a program that reads variables and arrays from a remote CR800. I have a base (router) CR800. There will be 10 remote CR800's connected with RF401's.I see the …
The heater for the CPEC200 is not positioned along the intake pipe. The heater is in the "snoutrain-cap" of the vortex intake. …
Hi all.I am using a CR1000 with a NL115 and a modem.When deployed the system does not use the ethernet port of the NL115 but goes online via the GPRS-modem.But while developing i r …