When I specify workspace pixel dimensions to match the native resolution of the monitor (in my case, 2560x1600 for a 30" monitor), there are scroll bars that appear on the bot …
文档资料
Warnings are identified by the instrument when system parameters go beyond the optimum manufacturer-defined range, but where this does not prevent the operation of the sensor. An e …
HelloIs it allowed to declare variables and constants using PUBLIC and CONST inside a SlowSequence?e.g.BeginProgScan.NextScanSlowSequencePUBLIC testvariable As StringCONST testcons …
Alarms are identified by the instrument if a self-test parameter goes beyond the range of a user-defined or manufacturer-defined setting.Examples of manufacturer-defined settings i …
I have five CR10x. Recently I got problem with (I think) internal batteries. When I change the external battery, the time no longer correct, start from 00:00, date as well and all …
Some alarms, such as the tilt-angle and low-power battery shutdown voltages, are configurable. Most parameters are not configurable because they relate to the internal safe functio …
CR1000 manual suggestDSP4, and GOESData functions as alternatives to store data besides a card. In loggernet there is not further reference for DSP4; I followed the instructions fo …
In the unlikely event that a warning or an alarm is issued, the warning flag output indicates the nature of any fault.Few warnings or alarms are actionable by the user—except …
I was experimenting with some code for sending datas using ftp through COM1.Something was wrong with the code and it seems to stuck in an endless loop, sending out over and over th …
Look for a stamp on top of the battery. The stamp may be in a date format of YYMMDDXX where:YY is the year.MM is the month.DD is the day.XX is the manufacturing plant.This indicate …