Hello, I am using up a bunch of our CR1000 control ports reading wetdry contacts and I'm running out.I looked at expanding the control ports with a SDM-CDXX module but budgets kill …
文档资料
The CS110 uses the same gas discharge tubes, etc., so it provides similar surge protection as the CR1000. The ground paths are different, although both are intended to provide a go …
helloI've read the features of powerup.ini in the CR800 and CR1000 manuals. Though I'm not sure which hardware it needs to benefit from powerup.ini.Does it work only on a CF card? …
Two CS547A-L probes can be wired to a CR1000 datalogger, and three CS547A-L probes can be wired to a CR3000 datalogger. To wire additional probes to either of these data loggers, a …
Is it possible to upload a new OS to a CR1000 without a direct serial connection? In my case, I'm communicating with the datalogger using LoggerNet over TCPIP. The datalogger has a …
Cloud heightCloud height is commonly used to refer to the height of the cloud base above ground level. (This is what the ceilometer reports.) However, it can also be used to refer …
helloI like to use my own constant to open a port for serial comminications. First I tried to use a string constant, but the compiler requested a numeric constant.Based on the list …
The cloud ceiling height relates to the height of the base of the cloud where the sky is overcast or has broken cloud cover. …
The documentation states that "RTMCRT Version 3.x is optimized for displaying projects created using the RTMC Pro 3.x development tool."Does this mean that RTMC Dev 3.x w …
The CS135 has LED indicator lights that flash to indicate normal or fault statuses.Where:1 flash every 10 seconds = OK, no fault2 flashes every 10 seconds = warning (possible degra …