Yes. When you are ready to order your DustSens sensor, be sure to request a system that is designed for use with thin-film solar panels. …
问题
If you have an RF401RF401ARF407RF411ARF412RF427 network that has been working reliably for months and then suddenly fails with intermittent data collection, the site hasn’t c …
Verizon recommends using MIMO antennas because their 4G towers use multiple antennas for communication. If your modem has two separate antennas or a MIMO antenna (which is two ante …
Compared to a third-party interface, the NL121 is easier to attach, easier to use, performs better, provides access to the IP services and clients in the data logger OS, and is eas …
To connect a data logger to an OMNISAT-M, use the RS-232 port of the data logger. Connection using the CS IO port of the data logger will not be successful. …
The SDM8X50 is the same as the SDMX50SP in form, fit, and function. When purchased with the –E enclosure option, a 10 x 12 in. environmental enclosure is included, making it …
The hermetically sealed relays used in the SDM8X50 are much quieter than the relays used with the retired SDMX50-series multiplexers. Although listening for the clicking on the SDM …
The maximum recommended segment length (length of cable between the NL device and the Ethernet repeater, hub, switch, or router it is connected to) for 10Base-T and 100Base-Tx …
Yes. The communications tasks run independently of each other, and multiple computers can be connected at the same time. If PakBus is being used to communicate, ensure that the com …
The CR6 has true RS-232 levels on the RJ45 (CPI), and the data logger can be programmed for RS-232 levels on C1-C2 and C3-C4. …