Has anyone encountered this error? It's not on the list.....I have a site that was working fine (cold though..-30C) and I have been having bad connection rates and I noticed I had holes in the table (hourly,15min) after what I thought was a Telco/Raven issue. I had about 6 hours of holes with no lapse in rcd #'s. So I guess it wasn't the telco after all but an issue with connectivity with the cell and logger....logger locked...anyways, I have been collecting sucessfully for 3 hours without a problem......don't know if I should resend program..anyways, if someone has seen this error code, please respond..thks Mike
Hello Mike,
Error code 73 means there are skipped records in data table #3 (as you figured out). [7N = skipped record in table N.]
If you have a way to get into "terminal mode" (terminal emulation in LoggerNet for instance) or have a keyboard display, check the datalogger's *B mode and advanced to location no. 04: This is number of watchdog errors in the datalogger, which could indicate a problem. Also, *B 05: is the number of table overruns. If this value has some non-zero number in it(particularly if it continues to increment), I would look at increasing the scan interval so that it is large enough to accommodate all sensor measurements & processing.
Dana W.