When the program below executes the Average command, how many data points is it averaging. It seems like since the table is called after every scan, the Average would bejust the av …
最新内容
Hi,I have a Vaisala WXT520. In order to connect with CR10X, I am trying to program using Edlog 32 in LoggerNET with reference a manual, 'http:www.campbellsci.comdocumentsmanualswxt …
I'm investigating using PakBus over radio. I have read the PacBus net guide, but I can't find any typical "Hop Metric" figures, or any data on how many transactions are r …
I came across an old CR500 and when I was replacing the Lithium internal batteries of a couple other data loggers, I was surprised to find see that there was no internal battery fo …
Hello,I've done BASIC programming before, but I am new to the world of CRBasic. Any suggestions on where to start?新对话如下：Campbell Scientific conducts training classes every month.Th …
I have recently started working on a project using CR510's and am concerned w problematic connection.I use the SC32B adaptor when connecting, but I learned that it has not been use …
HiI am trying to measure the time it takes for a channelport to go to HIGH (+5V) on a CR215216 with in a scan.This channel is the output from be a basic ultrasonic range sensor tha …
Hello!I try to process an ASCII file, which includes data from a CSAT3 sonic anemometer and other instruments, with Edire software but it seems not working, not reading the data. T …
Hello everyone.I have a Campbell CR200series Weather Station sending data to the LoggerNet software, and i would like to send my data to the WUndergroung and from it to a web page. …
HiWe upgraded the OS in a CR10X to the ModBus enabled version and it runs fine when using the CS-IO port. Unfortunately this port is actually not available as it is used to upload …