No. …
最新内容
For an RF401A to communicate with an RF400, the RF401A must be configured to use the transparent communications option. …
The recommended maximum is 24 AVW206 devices. …
There are many cavity- and notch-type filters available from third-party manufacturers. …
No. In this scenario, the base RF401A can only communicate with the RF400 devices via the transparent communications protocol, or with the CR206X dataloggers via the PakBus protoco …
In theory, a single RF430 can communicate with 4,000 CR206X dataloggers, as this is the maximum number of unique PakBus addresses available for use in a single RF network. The prac …
The COM220 and the RF401A can coexist on the CS IO terminal, provided that they are assigned two different SDC addresses. …
The RF401A and RF411A have distinct advantages over their predecessors, including greater maximum transmit power, lower average power consumption, improved packaging, and the inclu …
The following are some suggestions:Keep the optics clean.Site-specific field calibration may be necessary for the best performance. Prevent the sensor from freezing. …
The CS616 and CS625 are the same in size, form, and function. The only difference is in the output signal. The CS616 has a ±700 mV square wave output, whereas the CS625 has …