EasyFlux® DL in its native form only supports Campbell Scientific open-path gas analyzers (that is, IRGASON or EC150). In some cases it may be possible to adapt the EasyFlux&re …
最新内容
>Can EasyFlux® DL be used with a sonic anemometer besides the IRGASON or CSAT3A? _Campbellsci 数采常见问题
EasyFlux® DL in its native form only supports the IRGASON or CSAT3A sonic anemometers. It is possible to adapt the EasyFlux® DL program to support other Campbell Scientific …
EasyFlux® DL is now available for both the CR3000 and CR6 dataloggers. …
In most cases it is possible to adapt the EasyFlux® DL program for other biomet or energy balance sensors. Contact Campbell Scientific to discuss the possibility of customizati …
EasyFlux® DL samples the eddy-covariance sensors at 10 Hz. It is possible to measure at 20 Hz using EasyFlux® DL C6OP running on a CR6 datalogger. …
EasyFlux® DL has been tested in a variety of landscapes including forest, open water, short crops, and desert. It has been found to work well in all landscapes, assuming the in …
To set up EasyFlux® DL, follow these steps:Open EasyFlux® DL in a text editor, such as the CRBasic Editor.Set the instrument constants (for example, which sensors are being …
It is the responsibility of the user to ensure data quality and fitness for publication. When the instruments are properly maintained and conditions are well-suited for open-path E …
Technically, the medium bracket (pn 31592) of the CMB200 Crossarm Brace Kit can be used with the CM202 crossarm, but Campbell Scientific does not recommend this usage. …
Newer EC155 models (serial numbers 2000 and greater) take advantage of the new vortex intake technology (U.S. Pat. No. 9,217,692), which significantly reduces the frequency of …