Short Cut has been in use for several years and has been a helpful tool for program generation. As such, it has been updated over the years to provide functionality that is not yet …
最新内容
Hi,So i need a current shunt CURS100 for the analog 4-20mA sensors.So i need 5 current shunts:windspeedwinddirectiontemphumradiationThe sensors need a 24vdc powersupply, but my cr1 …
Yes, this interface was originally developed for the water market but was not developed to only handle that market's applications. For example, customers have used it for MET appli …
Hello,I have a analog cup anemometer and winddirection set and temphum and a radiation meter from Mierij Meteo.This windsensors have a termination of 4-20mA @ 0..50 ms. By means of …
Yes. If the sensor is compatible with the hardware, it can be used with this interface by using one of the generic sensor input options. …
whether the datalogger can be set during his lifetime for just a few years? for example we want the datalogger can only operate for 2 years, after that we have to settingturn on ag …
Yes, but only as needed. At this point, the generic sensor options should cover all the needs, and they are very easy to use. This list was intentionally kept small to reduce compl …
Hello.I have a CR1000 data logger, the problem is that: I send the program compiled to the data logger and then I desconect the data logger to the current 12V ..... when past some …
I need to test an COM300 phone modem. The COM300 is connected to an analog phone line and a CR10 datalogger with a SC12 cable.It is grounded to the datalogger as well.When the anal …
The CR300 must have the Wi-Fi option built in. With the Hydro-Link interface already applied to the data logger, all the web pages of the interface reside on the logger. Now t …