As a general recommendation, recalibration should be done every two years. …
文档资料
Hello,I am trying to hook up a PT100 to the Campbell C1000 datalogger. I know the wire's resistance and prefer to do a 2-wire measurement on the resistance, correcting afterward fo …
The window in the Apogee infrared sensor is inset and protected, but it can become partially blocked in three ways:Spiders can make a nest in the entrance. Campbell Scientific reco …
Everyone,I have a Cr1000 that is working 100%, but two days ago it stopped logging any data. Any help ?SincerelyJames新对话如下：Hi James,Could be any number of reasons, can you give mor …
There are two accuracy specifications listed for the SI-111SS:One for when the difference in the target and sensor body temperatures is less than 20°C (more accurate)One for wh …
Hello Everyone,I'm looking for some guidance with shaft encoders, specifically this one http:www.quantumdev.comproductsoptical_encodersqd145.htmlWe are using the device in the TTL …
The SI-111SS can be used to measure a wide variety of surfaces, including water and snow. When measuring objects with low emissivity, however, it is particularly important to apply …
Hi, I want to do the same like http:www.campbellsci.comforummessages.cfm?threadid=5CDA2CC2-FC6F-52D0-CEB824474A064916but using a CR10x datalogger.The program on use for routine mea …
No. The CS301CBL is used with the CS301. …
No. It’s not the range that makes a sensor a quantum sensor. It is the type of light filter used with the photocell that only allows specific wavelengths of light in the PAR …