Compare the sensor against a recently calibrated CS320 on a clear, sunny day with the sun overhead. Ensure that the sensor being used as a reference is also level. …
文档资料
I have been programming CR500, CR510, CR10X and CR10 loggers with the INW pressure transducers (PS9104E, PS9105 and PS9805).To program this equipment I have been using Shortcut Sof …
Just wondering if anybody is using this sensor with a CR10X logger? If so was wondering if you could supply programming instructions.Thanks新对话如下：PNBOR,I'm hoping someone else jumps …
The leveling base provides physical stability and helps ensure the sensor is leveled correctly. It is not recommended to use the sensor without the base. The sensor mounts to the b …
Is there any way to set the defaults in the email setup popup window for Alarm components in RTMC Pro?Or is it necessary to enter this information in for each alarm.I know I can se …
No. It’s not the range that makes a sensor a quantum sensor. It is the type of light filter used with the photocell that only allows specific wavelengths of light in the PAR …
Application:Remote station is a solar supplied system with a CR1000 enclosure mounted. The distance between both systems is flat terrain, approx. 300m in line of sight no obstacles …
The CR1000 and CR1000X will be sold concurrently for no less than two years. We anticipate the CR1000 will be retired in December of 2019 and will be supported until December …
We have about 15 years worth of LI-190 (PAR) data, from about 10 stations, where the multiplier was 200 rather than the individually calculated multipliers we use now.I can't think …