Hello!I try to process an ASCII file, which includes data from a CSAT3 sonic anemometer and other instruments, with Edire software but it seems not working, not reading the data. T …
文档资料
Hello everyone.I have a Campbell CR200series Weather Station sending data to the LoggerNet software, and i would like to send my data to the WUndergroung and from it to a web page. …
EasyFlux® DL samples the eddy-covariance sensors at 10 Hz. It is possible to measure at 20 Hz using EasyFlux® DL C6OP running on a CR6 datalogger. …
HiWe upgraded the OS in a CR10X to the ModBus enabled version and it runs fine when using the CS-IO port. Unfortunately this port is actually not available as it is used to upload …
EasyFlux® DL has been tested in a variety of landscapes including forest, open water, short crops, and desert. It has been found to work well in all landscapes, assuming the in …
To set up EasyFlux® DL, follow these steps:Open EasyFlux® DL in a text editor, such as the CRBasic Editor.Set the instrument constants (for example, which sensors are being …
Hi all,we recognized a strange behavior in Loggernet and can not find the problem! Maybe someone can help? We have two measurements. Both are running a CR1000 to store 1hz data on …
It is the responsibility of the user to ensure data quality and fitness for publication. When the instruments are properly maintained and conditions are well-suited for open-path E …
Hello,Our systems usually has a Raven connected to a CR1000. Is there a way the use a NL120 to communicate with a networked camera and still provide external control of the camera. …
Technically, the medium bracket (pn 31592) of the CMB200 Crossarm Brace Kit can be used with the CM202 crossarm, but Campbell Scientific does not recommend this usage. …