Use of the callback feature is handled under program control by the data logger and is not affected by the RF401A. …
文档资料
For the RF401, there is not a Status table similar to that for a data logger, but some statistical information can be retrieved via terminal mode. …
Hi, I was wondering (and not really seeing in the CR1000 literature) the max current load the 12V Power Out terminals can support.Is the value the same as for switched 12 volts? th …
I have a CR2xx hooked up to a DAA H340-SDI rain gauge.I'm trying to use the aXGT! command to get the sensor's current time.I've tried two methods and have been unable to get it to …
For an RF401A to communicate with an RF400, the RF401A must be configured to use the transparent communications option. …
Hi,I’m using a CR10X with a single weather station and I’m having trouble getting the Serial Out (P96) command to send ASCII data out to my PC COM port consistently.I'm trying to r …
I have a recently purchased CR200 and an older SR50 sonic ranging sensor.I've tried all SDI-12 addresses, and I always get "NAN" for my outputs. I've been using short cut …
The recommended maximum is 24 AVW206 devices. …
Where is the list of fields for the Status table that are "read only"?Also, why won't the "StationName" routine accept a string variable to set the station name …