>Where can the MAC (physical) address of an NL100 be found?_Campbellsci 数采常见问题

Follow these steps:

  1. Using the Device Configuration Utility, access the terminal mode by selecting Unknown in the Device Type column.
  2. Select the correct communications port for the computer (that is, the COM port that connects the null modem cable to the RS-232 port of the NL100).
  3. Set the baud rate to 115200.
  4. Disconnect the power to the NL100.
  5. Click the Connect button to open the terminal screen.
  6. Hold down the Enter key on the computer keyboard.
  7. Connect the power to the NL100.
  8. Type in VER at the resulting terminal mode prompt, and click the Enter key. The MAC address is provided.

>Where can the MAC (physical) address of an NL100 be found?_Campbellsci 数采常见问题

分享到:

原文链接:,转发请注明来源!
「>Where can the MAC (physical) address of an NL100 be found?_Campbellsci 数采常见问题」评论列表

发表评论