We do not have a heated version of the ClimaVUE™50 at this time. The model to correct the air temperature is based on the energy balance and should be good in all situations …
最新内容
The ClimaVUE™50 does need to be powered continuously to make the routine wind measurements (every 10 seconds) that are combined to give the wind speed and direction. If you o …
The average current drain for the ClimaVUE™50 during the quiescent state and routine 10 s wind measurement is on the order of 300 µA. Polling with the aR7! command ever …
The ClimaVUE™50 mounting type can be a meteorological stand, pole in cement, or tripod: 31.8 to 50.8 mm, 1.25 to 2.0 in. diameter. The ClimaVUE™50 is fitted with a V-bo …
The ClimaVUE™50 collects all the information necessary to correct for absorbed radiation using an energy balance approach. …
The SDI-12 bus is capable of having at least 10 sensors connected to it, each with 200 feet of cable. With fewer sensors, longer cable lengths are possible. …
See the maintenance section of the manual for recommendations. …
No. The SP230SSCBL is used with the SP230SS. …
No. The SI-111SSCBL is used with the SI-111SS. …
As a general recommendation, recalibration should be done every two years. …